Close Out Items | Final Close Out Prices

UPDATED JULY 28, 2009

This section contains:

1. Items from other manufacturers that are no longer carried by Custom Signals

2. Items that were produced by Custom Signals, but can no longer be sold as new items.

3. Items that have been discontinued by Custom Signals

1. NJI

2. CIRCUITRON

SD-1 LED SIGNAL DRIVER

This is designed to drive individual bulbs up to 12V or LEDs. The LEDs will require current sensing resistors.

SD-3 BICOLOR SIGNAL DRIVER

This is designed to drive 2 terminal or 3 terminal bicolor LEDs.

3. INTEGRATED SIGNAL SYSTEMS

LIST PRICE OUR PRICE QUANTITY

ISS electronics are very popular with HO and N scalers. Each of these PCBs come either as a set of parts or completely assembled. Even though all of the PCBs below are completely assembled, I am selling them at the unassembled parts price.

This sale is first come, first served and is limited to quantities in stock. Go to the ISS web site for more detailed information on each part.

$7.55 $5.50 4

RSMA SIGNAL REPEATER MODULE

These are used to send the signal aspects back to a control panel

$17.30 $11.25 2

SCA-2 STOCK SIGNAL MODULE

Signal Control PCB for individual LEDs

$17.30 $11.25 7

SCA-2J SIGNAL CONTROL MODULE WITH NO RESISTORS

These do not have resistors so that different values can be used or jumpers can be put in for low voltage bulbs

$17.30 $11.25 15

SCA-2P PRR SIGNAL CONTROL MODULES

These have 390 ohm resistors for position light signals like the PRR

$17.30 $11.25 25

SCA-3 SEARCHLIGHT SIGNAL CONTROL MODULE

These are for signals using a bicolor LED

$11.50 $8.90 6

SFMA SIGNAL FLASHER MODULE

This board will flash any single target light.

$9.65 $7.30 6

TMA TURNOUT CONTROL MODULE

Used at turnouts

4. OLDER PRODUCTION ITEMS

REVISED JULY 28, 2009

The following group of signals come off a layout that Custom Signals signaled in the past and redone the signaling. The customer has moved and will no longer be modeling the PRR Railroad. These are used, but have been refurbished and checked out by Custom Signals. These do NOT come with the current signal control boards, but they are available at an extra cost with the purchase of the signal. These quantities and prices are current as of July 28, 2009. Please call for current quantities of each signal and to hold any signal.

SHILOH GROUND SIGNAL This is a Shiloh signal production. It comes wired as cathode common. It has been tested and works.

Cost $20.00

1 in stock

OP-11 HOUSE OF DUDDY DWARF SIGNAL This is similar to the new PRR-11 dwarf signal. It has 12 volt LEDs so it will not work with the new signal control boards. It does not come with any signal control board. It can be controlled with relays, switches or computers.

List price was $11.95.

$8.00

2 in stock

BRACKETED TOWER WITH SINGLE SEARCHLIGHT SIGNALS

This signal is called a bracketed tower. It is used by the railroad as an intermediate signal for a double track main line. It was built by CUSTOM SIGNALS in the late 1990's.

The tower platform is a scale 24 feet above the rail head. It is made completely of brass parts. It has all brass ladder, platforms and railings where appropriate. The platform is a brass etched grading with the correct scale spacing. The railing is made of brass angle iron just like the real thing. Brass ladder supports hold the ladder in place. The tower will come with a simulated concrete foundation.

The targets (lights) are three terminal LEDs. The LED gives a true "blue/green" not one of those yellowish green LEDs. You can get the yellow aspect by driving the red and green at the same time. The signal comes with 2 Atlas signal control boards (list $19.95 each) to drive the targets to all 3 colors aspects. You can add other electronics from customsignals.com to integrate with other signals on the layout. You can get some credit if you do not want the control boards.

Winner pays exact cost of domestic shipping and insurance to your zip code. Please wait for invoice before paying. Combined shipping will be given if possible. Please check my other listings

1 in stock

Cost $100

BRACKETED TOWER WITH SINGLE SEARCHLIGHT SIGNALS

This signal is called a bracketed tower. It is used by the railroad as an intermediate signal for a double track main line. It was built by CUSTOM SIGNALS in the late 1990's.

The tower platform is a scale 24 feet above the rail head. It is made completely of brass parts. It has all brass ladder, platforms and railings where appropriate. The platform itself is a brass etched grading with the correct scale spacing. The railing is made of brass angle iron just like the real thing. Brass ladder supports hold the ladder in place. The tower will come with a simulated concrete foundation.

Each of the targets is made of a die cast NYC style searchlight head. It has the "teardrop" visor so familiar with that signal head. In front is a lens to hide the LED. The targets (lights) are three terminal LEDs. The LED gives a true "bluish green" not one of those yellowish green LEDs. You can get the yellow aspect by driving the red and green at the same time. The signal comes with 2 Atlas signal control boards (list $19.95 each) to drive the targets to all 3 colors aspects. You can add other electronics from customsignals.com to integrate with other signals on the layout. Please check the Track Configuration Library on the customsignals.com web site for your application. You can get some credit if you do not want the control boards.

Winner pays exact cost of domestic shipping and insurance to your zip code. Please wait for invoice before paying. Combined shipping will be given if possible. Please check my other listings

1 in stock

Cost $149.95

BRACKETED TOWER WITH DOUBLE SEARCHLIGHT SIGNALS

This signal is called a bracketed tower. It is used by the railroad as an interlocking signal for a double track main line. It was built by CUSTOM SIGNALS in the late 1990's.

The tower platform is a scale 24 feet above the rail head. It is made completely of brass parts. It has all brass ladder, platforms and railings where appropriate. The platform itself is a brass etched grading with the correct scale spacing. The railing is made of brass angle iron just like the real thing. Brass ladder supports hold the ladder in place. The tower will come with a simulated concrete foundation.

Each of the targets is made of a die cast NYC style searchlight head. It has the "teardrop" visor so familiar with that signal head. In front is a lens to hide the LED. The targets (lights) are three terminal LEDs. The LED gives a true "blue/green" not one of those yellowish green LEDs. You can get the yellow aspect by driving the red and green at the same time. The signal comes with 4 Atlas signal control boards (list $19.95 each) to drive the targets to all 3 colors aspects. You can add other electronics from customsignals.com to integrate with other signals on the layout. Please check the Track Configuration Library on the customsignals.com web site for your application. You can get some credit if you do not want the control boards.

Winner pays exact cost of domestic shipping and insurance to your zip code. Please wait for invoice before paying. Combined shipping will be given if possible. Please check my other listings

1 in stock

Cost $199.95

BRACKETED TOWER WITH TRIPLE SEARCHLIGHT SIGNALS

This signal is called a bracketed tower. It is used by the railroad as an interlocking signal for a double track main line. It was built by CUSTOM SIGNALS in the late 1990's.

The tower platform is a scale 24 feet above the rail head. It is made completely of brass parts. It has all brass ladder, platforms and railings where appropriate. The platform itself is a brass etched grading with the correct scale spacing. The railing is made of brass angle iron just like the real thing. Brass ladder supports hold the ladder in place. The tower will come with a simulated concrete foundation.

Each of the targets is made of a die cast NYC style searchlight head. It has the "teardrop" visor so familiar with that signal head. In front is a lens to hide the actual LED. The targets (lights) are three terminal LEDs. The LED gives a true "blue/green" not one of those yellowish green LEDs. You can get the yellow aspect by driving the red and green at the same time. The signal comes with 6 Atlas signal control boards (list $19.95 each) to drive the targets to all 3 colors aspects. You can add other electronics from customsignals.com to integrate with other signals on the layout. Please check the Track Configuration Library on the customsignals.com web site for your application. You can get some credit if you do not want the control boards.

Winner pays exact cost of domestic shipping and insurance to your zip code. Please wait for invoice before paying. Combined shipping will be given if possible. Please check my other listings

1 in stock

Cost $249.95

5. BACHMANN

BACHMANN SIGNAL BRIDGE LIGHT KIT

This is a kit I designed to light up the Plasticville signal bridges. It comes with 4 GOW bulbs with 18" wire leads. It also has small housings that glue to the back of each color lens Let me know if you need substitute lenses or signal housings.

$9.95.

6. KEIL-LINE PRODUCTS

475 D-STYLE MARKER LIGHT

This is a housing and red lens for a single target signal.

10 in stock @ $5.00 each

477 TWO 1 COLOR DWARF W/BULB

This is a single target housing for use as a railroad or highway light.

2 in stock @$5.00 each

478 TWO 1 COLOR DWARF W/OUT BULB

This is the same as above, but without bulb.

0 in stock

510 TWO 1 COLOR DWARFS W/BULB AND WITH BASE

This is the same as the 477, but also comes with a base.

10 in stock @ $8.00 each

511 TWO 1 COLOR DWARFS W/OUT BULB AND WITH BASE

This is the same as the 478, but also comes with a base.

2 in stock $5.00 each

7. MTH SIGNAL PARTS

MTH POSITION LIGHT SIGNAL HEAD

Because of specific demand and needs, I am selling the target heads separately form the sockets and circuit boards. Each of these signal heads is brand new like the 30-11030A. The bridge mounting socket with wires, PCB control board is also new.

These come off the MTH bridges that I use to mount the position light signals from Custom Signals.

If you buy both, you can use these to make your own signals. Place a signal over a tunnel, on an existing bridge, or any other unique place on your layout without having to buy the entire signal.

10 of each in stock

$5.00 each